Ide Master, Ide Slave - IEI Technology PCIE-9450 User Manual

Legacy IDE Channels [PATA Pri, SATA Sec]
Use the Legacy IDE Channels option to determine how SATA channels and PATA
channels are ordered.
SATA Only
PATA Pri, SATA Sec
SATA Pri, PATA sec
PATA Only
IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
Section 6.3.2.1 appear.

6.3.2.1 IDE Master, IDE Slave

Use the IDE Master and IDE Slave configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.
Page 92
PCIE-9450 PICMG 1.3 CPU Card
to 6 storage devices. Some legacy OS do not support
this mode.
Enables SATA channels only.
D Puts SATA channels behind PATA channels.
EFAULT
Puts SATA channels before PATA channels.
Enables PATA channels only.