External Peripheral Interface Connection; Ps/2 Y Cable Connection - IEI Technology PCIE-9450 User Manual
Picmg 1.3 lga775 intel core 2 duo, pentium 4/d vga, dual pcie gbe, sata ii and usb2.0
Hide thumbs
Also See for PCIE-9450:
- Quick installation manual (3 pages) ,
- Quick installation manual (8 pages)
Table of Contents
Advertisement
PCIE-9450 PICMG 1.3 CPU Card
5.7 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
Mouse and keyboard
RJ-45 Ethernet cable connectors
USB devices
VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding PCIE-9450 external peripheral interface connector making
sure the pins are properly aligned.
5.7.1 PS/2 Y Cable Connection
The PCIE-9450 has a single PS/2 connector on the external peripheral interface panel.
The PS/2 connector is connected to a keyboard and mouse Y cable. To connect a
keyboard to the PCIE-9450, please follow the instructions below.
Step 1:
Locate the PS/2 connector. The location of the PS/2 connector is shown in
Chapter 3.
Step 2:
Align the PS/2 connector. Align the PS/2 connector on the keyboard cable with
the PS/2 connector on the external peripheral interface.
Step 3:
Insert the PS/2
cable connector into the PS/2 cable connector on the PCIE-9450.
See Figure
connector.
Once the connectors are properly, insert the PS/2 Y
5-16.Step 0:
Page 81
Advertisement
Table of Contents
