Introduction; Starting Setup; Using Setup - IEI Technology PCIE-9450 User Manual

6.1 Introduction

A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup
program allows users to modify the basic system configuration. This chapter describes
how to access the BIOS setup program and the configuration options that may be
changed.

6.1.1 Starting Setup

The AMI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.
1. Press the D
2. Press the D
If the message disappears before the D
again.

6.1.2 Using Setup

Use the arrow keys to highlight items, press E
PageDown keys to change entries, press F1 for help and press E
keys are shown in.
Key Function
Up arrow Move to previous item
Down arrow Move to next item
Left arrow Move to the item on the left hand side
Right arrow Move to the item on the right hand side
Esc key Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu --
Exit current page and return to Main Menu
Page Up key Increase the numeric value or make changes
Page Dn key Decrease the numeric value or make changes
Page 86
key as soon as the system is turned on or
ELETE
key when the "Press Del to enter SETUP"
ELETE
message appears on the screen.
key is pressed, restart the computer and try
ELETE
PCIE-9450 PICMG 1.3 CPU Card
0.
to select, use the PageUp and
NTER
to quit. Navigation
SC