Keyboard/Mouse Y-Cable Connector; Figure 5-11: Keyboard/Mouse Y-Cable Connection - IEI Technology PCIE-9450 User Manual
Picmg 1.3 lga775 intel core 2 duo, pentium 4/d vga, dual pcie gbe, sata ii and usb2.0
Hide thumbs
Also See for PCIE-9450:
- Quick installation manual (3 pages) ,
- Quick installation manual (8 pages)
Table of Contents
Advertisement
PCIE-9450 PICMG 1.3 CPU Card
5.6.3 Keyboard/Mouse Y-cable Connector
The PCIE-9450 is shipped with a keyboard/mouse Y-cable connector. The
keyboard/mouse Y-cable connector connects to a keyboard/mouse connector on the
PCIE-9450 and branches into two cables that are each connected to a PS/2 connector,
one for a mouse and one for a keyboard. To connect the keyboard/mouse Y-cable
connector please follow the steps below.
Step 1:
Locate the connector. The location of the keyboard/mouse Y-cable connector
is shown in Chapter 3.
Step 2:
Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the PCIE-9450 keyboard/mouse connector. See
Step 3:
Insert the cable
the keyboard/mouse connector on the PCIE-9450, connect the cable connector
to the onboard connectors. See
Figure 5-11: Keyboard/mouse Y-cable Connection
connectors.
Once the cable connector is properly aligned with
Figure 5-11.
Figure 5-11.
Page 75
Advertisement
Table of Contents
