Backplane Installation; Cpu Card Installation; Internal Peripheral Device Connections; Peripheral Device Cables - IEI Technology PCIE-9450 User Manual

PCIE-9450 PICMG 1.3 CPU Card

5.5.2 Backplane Installation

Before the PCIE-9450 can be installed into a chassis, a backplane must first be installed.
Please refer to the installation instructions that came with the backplane and the chassis.
NOTE:
IEI has a wide range of backplanes available. Please contact your
PCIE-9450 vendor, reseller or an IEI sales representative at
sales@iei.com.tw
to find out more about the available backplanes.

5.5.3 CPU Card Installation

To install the PCIE-9450 CPU card onto the backplane, carefully align the CPU card
interface connectors with the corresponding socket on the backplane. To do this, please
refer to the reference material that came with the backplane. Next, secure the CPU card to
the chassis. To do this, please refer to the reference material that came with the chassis.

5.6 Internal Peripheral Device Connections

5.6.1 Peripheral Device Cables

The cables listed in
Quantity
Type
1
ATA 66/100 flat cable
1
KB/MS PS/2 Y cable
1
RS-232 cable
4
SATA drive cable
2
SATA drive power cable
1
USB cable

Table 5-3: IEI Provided Cables

or visit the IEI website (http://www.ieiworld.com.tw)
Table 5-3 are shipped with the PCIE-9450.
Page 73