Figure 5-4: Insert The Lga775 Cpu - IEI Technology PCIE-9450 User Manual
Picmg 1.3 lga775 intel core 2 duo, pentium 4/d vga, dual pcie gbe, sata ii and usb2.0
Hide thumbs
Also See for PCIE-9450:
- Quick installation manual (3 pages) ,
- Quick installation manual (8 pages)
Table of Contents
Advertisement
facing upward.
Step 5:
Correctly position the CPU. Match the Pin 1 mark with the cut edge on the
CPU socket.
Step 6:
Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU.
Carefully match the two orientation notches on the CPU with the socket
alignment keys.
Step 7:
Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are
properly aligned, the CPU should slide into the CPU socket smoothly. See
Figure 5-24.
Figure 5-4: Insert the LGA775 CPU
Step 8:
Close the CPU socket. Close the load plate and engage the load lever by
pushing it back to its original position. Secure the load lever under the retention
tab on the side of CPU socket.
Step 9:
Connect the CPU 12V cable to the 12After the cooling kit is installed
connect the CPU cable to the CPU 12V power
Page 66
PCIE-9450 PICMG 1.3 CPU Card
connectorStep 0:
Advertisement
Table of Contents
