Sata Drive Connection; Figure 5-13: Sata Drive Cable Connection - IEI Technology PCIE-9450 User Manual
Picmg 1.3 lga775 intel core 2 duo, pentium 4/d vga, dual pcie gbe, sata ii and usb2.0
Hide thumbs
Also See for PCIE-9450:
- Quick installation manual (3 pages) ,
- Quick installation manual (8 pages)
Table of Contents
Advertisement
5.6.5 SATA Drive Connection
The PCIE-9450 is shipped with SATA drive cables and SATA drive power cable. Follow
the steps below to connect the SATA drives to the CPU card.
Step 1:
Locate the connectors. The locations of the SATA drive connectors are shown
in Chapter 3.
Step 2:
Insert the cable connector. Press the clip on the connector at the end of the
SATA cable and insert the cable connector into the onboard SATA drive
connector. See Figure 5-13.
Figure 5-13: SATA Drive Cable Connection
Step 3:
Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See Figure 5-14.
Page 78
PCIE-9450 PICMG 1.3 CPU Card
Advertisement
Table of Contents
