Super Io Configuration; Bios Menu 7: Super Io Configuration - IEI Technology PCIE-9450 User Manual

PCIE-9450 PICMG 1.3 CPU Card

6.3.4 Super IO Configuration

Use the Super IO Configuration menu (BIOS Menu 7) to set or change the configurations
for the FDD controllers, parallel ports and serial ports.

BIOS Menu 7: Super IO Configuration

OnBoard Floppy Controller [Enabled]
Use the OnBoard Floppy Controller to enable or disable the floppy controller. If a floppy
disk is not being used in the system, disabling this option frees up system resources that
can be redirected elsewhere in the system.
Disabled
Enabled
Serial Port1 Address [3F8/IRQ4]
Use the Serial Port1 Address option to select the Serial Port 1 base address.
Disabled
3F8/IRQ4
Allows BIOS to disable the floppy controller
Allows BIOS to enable the floppy controller
D
EFAULT
No base address is assigned to Serial Port 1
D Serial Port 1 I/O port address is 3F8 and the interrupt
EFAULT
address is IRQ4
Page 99