Ide Master, Ide Slave And Serial-Ata Primary/Secondary Channel - IEI Technology NOVA-9102 User Manual

NOVA-9152 and NOVA-9102 5.25" Motherboard
Legacy IDE Channels [PATA Pri, SATA Sec]
SATA Only
PATA Pri, SATA Sec
PATA Pri., PATA Sec
IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
Section 6.3.2.1 appear.
6.3.2.1 IDE Master, IDE Slave and Serial-ATA Primary/Secondary
Channel
Use the IDE Master and IDE Slave configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.
Only the SATA drives are enabled.
D The IDE drives are enabled on the Primary
EFAULT
IDE channel. The SATA drives are enabled on
the Secondary IDE channel.
The IDE drives are enabled on the primary
and secondary IDE channels. SATA drives
are disabled.
Page 133