Cleaning; Disposal - wtw inoLab Cond 730 Operating Manual

Laboratory conductivity meter
Table of Contents

Advertisement

Maintenance, cleaning, disposal
Packing
Batteries
Measuring
instrument
62
5.2

Cleaning

Occasionally wipe the outside of the measuring instrument
with a damp, lint-free cloth. Disinfect the housing with iso-
propanol as required.
Caution
The housing is made of synthetic material (ABS). Thus,
avoid contact with acetone or similar detergents that contain
solvents. Remove any splashes immediately.
5.3

Disposal

The measuring instrument is sent out in a protective trans-
port packing.
We recommend: Keep the packing material. It protects the
instrument against damage during transport.
This note refers to the battery regulation that applies in the
Federal Republic of Germany. We would ask end-consum-
ers in other countries to follow their local statutory provi-
sions.
Note
In compliance with §14 of the B
would like to point out that this instrument contains batteries.
Batteries that have been removed must only be disposed of
at the recycling facility set up for this purpose or via the retail
outlet.
It is illegal to dispose of them in household refuse.
Dispose of the measuring instrument as electronic waste at
an appropriate collection point. It is illegal to dispose of it in
household refuse.
R
ATTERY
EGULATION
Cond 730
, we

Advertisement

Table of Contents
loading

Table of Contents