wtw inoLab Cond 730 Operating Manual page 14

Commissioning
Connecting the
plug-in power
supply
14
12 Set the current time by pressing
13 Confirm with
switches to the measuring mode.
14 Switch off the instrument by pressing
The measuring instrument works battery-powered. It can,
however, also be supplied by the plug-in power supply
which is available as an accessory.
Warning
The line voltage on site must lie within the input voltage
range of the original plug-in power supply unit (see chapter
7 T
ECHNICAL DATA
Caution
Use original plug-in power supplies only
(see chapter 7 T
ECHNICAL DATA
1 Insert the plug (1) into the socket (2) of the
conductivity meter.
g
. The measuring instrument then
).
).
3
Cond 730
82.
e
.
2
1