wtw inoLab Cond 730 Operating Manual page 77

Laboratory conductivity meter
Table of Contents

Advertisement

Cond 730
Lists
Resistance
All substances (solids, liquids, or gases) with mobile charge
carriers like for example electrons or ions have a finite ohmic
resistance, which means they have an electric conductance
that can be measured or an electric conducitivtiy.
Salinity
The salinity is a sum parameter especially for seawater;
it gives the salt content of seawater.
Temperature
The temperature has a very strong impact on the electrical
compensation (TC)
conductivity. To be able to compare measured values, it is
necessary to temper or convert the test sample to a refer-
ence temperature.
Test sample
The sample to be measured. It can be liquid or solid.
Total dissolved
Mass that remains of the substances dissolved in an aque-
solids (TDS)
ous solution after a fixed filtering and drying procedure, as
far as these substances are not volatile under the conditions
of this procedure. The total dissolved solids refer to the vol-
ume of the filtered aqueous sample used und are given in
mg/l.
77

Advertisement

Table of Contents
loading

Table of Contents