wtw inoLab Cond 730 Operating Manual page 39

Cond 730
5 As soon as all 800 memory locations are full, the
AutoStore function is terminated (Int 1 = OFF).
If too few storage locations are available for your
measurements:
– backup the data storage (see page 40) and
– clear the data storage (see page 46).
g
6 Confirm with
The prompt for the I.D. number appears on the
display.
82
7 Press
g
8 Confirm with
The instrument changes to the measuring mode and
starts the measuring and storage procedure.
AutoStore flashes on the display.
.
to set the required I.D. number.
.
Operation
39