Switching On Autostore (Int 1) - wtw inoLab Cond 730 Operating Manual

Operation
Setting the storage
interval
38

4.5.2 Switching on AutoStore (Int 1)

The storage interval (Int 1) determines the time interval
between automatic storage processes.
After the time interval expires, the current data record is
transmitted to the data storage and to the printer/interface.
The storage interval (Int 1) is set to OFF in the factory.
Thus, the AutoStore function is switched off.
To switch the function on, set up a time interval (5 s, 10 s,
30 s, 1 min, 5 min, 10 min, 15 min, 30 min, 60 min).
Note
If the AutoStore function is active, the setting of the data
transmission interval (int 2) is ineffective (see page 47).
1 Press and hold down the
s
2 Press the
82
3 Press the
interval between storage processes.
4 Confirm with
The number of free memory locations appears on the
display.
g
key.
key. Int 1 appears on the display.
keys to set up the required time
g
.
Cond 730