Salinity - wtw inoLab Cond 730 Operating Manual

Operation
22

4.2.2 Salinity

To measure the salinity, proceed as follows:
1 Perform the preparatory activities according to
section 4.2.
2 Immerse the conductivity measuring cell into the test
sample.
m
3 Press the
status line.
The salinity value of the sample appears on the
display.
4 If necessary, set the temperature by pressing
(see section 4.2, page 19).
5 Wait for a stable measured value.
key repeatedly until Sal appears in the
Cond 730
82