Reset - wtw inoLab Cond 730 Operating Manual

Cond 730
Measuring
parameters
Configuration
parameters
4.8

Reset

You can reset (initialize) measuring and configuration
parameters separately from one another.
The following measuring parameters (Cond InI) are reset to
the values they had on delivery:
Measuring mode
Cell constant
Temperature
compensation
Reference temperature
Temperature coefficient of
the linear temperature
compensation
TDS factor
Note
When the measuring parameters are reset, the calibration
data are lost. After the parameters have been reset, cali-
brate!
The following configuration parameters (InI) are reset to the
values they had on delivery:
Baud rate
Interval 1
(automatic storing)
Interval 2
(for data transmission)
-1
0.475 cm (calibrated)
-1
0.475 cm (set up)
nLF
2.000 %/K
1.00
4800
OFF
OFF
Operation
57