wtw inoLab Cond 730 Operating Manual page 76

Lists
AutoRead
Calibration
Cell constant
Conductivity
Control standard
solution
Drift control
Reference
temperature
76
Glossary
Monitors the electrode drift and releases the measured
value only after the stability criterion has been reached. In
this way, this procedure ensures the highest degree of pre-
cision and reproducibility.
The cell constant is determined through calibration. To do
so, the conductivity measuring cell is immersed into a series
of aqueous salt solutions with exactly known electric con-
ductivity. The relevant conductivity values are determined
using the conductivity measuring instrument.
Linear factor describing the geometrical dimensions of a
measuring cell and its electrodes.
l
With the value of the cell constant you can roughly descri-
be the application range of a conductivity measuring cell.
l
The cell constant is determined through calibration in one
or several calibration solutions.
The conductivity value is a sum parameter for the ion con-
centration of a test sample.
Solution with a known conductivity to determine or check the
conductivity.
See A R .
UTO EAD
In order to compare values measured at different tempera-
tures, the values have to be converted to a fixed tempera-
ture. This temperature is 25 °C, or, as an exception, 20 °C.
Cond 730