wtw inoLab Cond 730 Operating Manual page 58

Operation
Resetting
measuring
parameters
Resetting
configuration
parameters
58
1 Press and hold down the
c
2 Press the
82
3 Use to toggle between no and YES.
yes: reset measuring parameters.
no: retain settings.
g
4 Confirm with
The instrument changes to the configuration
parameters.
5 Toggle between no and yes by pressing
yes: reset configuration parameters.
no: retain settings.
g
6 Confirm with
The instrument changes automatically to the
conductivity measuring mode.
g
key.
key.
.
.
Cond 730
82
.