wtw inoLab Cond 730 Operating Manual page 37

Cond 730
StoFull StoFull StoFull StoFull
message
2 Confirm with
The display changes to the input of the I.D. number.
3 Enter the required I.D. number (1 ... 999) by pressing
82
.
4 Confirm with
The instrument changes to the measuring mode.
This message appears if all 800 memory locations are full.
You have the following options:
Store the current measured value.
The oldest measured value is over-
written by this
Return to the measuring mode without
storing
Output the data storage
Delete the data storage
g
.
g
.
Operation
g
Press
Press any key
See page 40
See page 46
37