Warranty; Contact Us; Features - Nakanishi E2280 Operation Manual

3.

WARRANTY

We provide a limited warranty for our products. We will repair or replace the products if the cause of failure is due to
the following manufactures defects. Please contact us or your local distributor for details.
(1) Defect in manufacturing.
(2) Any shortage of components in the package.
(3) Where damaged components are found when initially opening the package.
(This shall not apply if the damage was caused by the negligence of a customer.)
4.

CONTACT US

For your safety and convenience when purchasing our products, we welcome your questions.
If you have any questions about operation, maintenance and repair of the product, please contact us.
Contact Us Contact Us
For U.S. Market
Company Name
Business Hours
U.S. Toll Free No.
Telephone No.
Fax No.
Web Address
For Other Markets
Company Name
Business Hours
Telephone No.
e-mail Address

5. FEATURES

① A high-speed brushless motor is used to achieve a maximum speed of 50,000min
5000 -J 4 , EM 25 N- 5000 -J 4 , EM- 2350 J
② Speed control and protection functions utilize a high performance microprocessor.
③ Automatic control and monitoring of spindle functions are possible.
④ W ide speed range, 1,000 - 50,000min
⑤ Compact CONTROLLER design allows easy installation in space restricted machines. Connectors and control
panel are front mounted for easy access.
⑥ The CONTROLLER is capable of being connected to AC100V or AC240V power sources. The Auto Sensing
feature reduces installation time and eliminates the possibility of connecting the wrong voltage.
⑦ The COTROLLER has a parameter function, which controls motor movement according to its use.
⑧ By setting the parameter
signal of the motor power line and the disconnect of the motor power line by safety relay, allows the E2280
CONTROLLER to establish a safe spindle system.
⑨ By setting parameter
This allows Error Codes to be reviewed if no one is present when the error occurs. Error History will be stored to
the CONTROLLER, even if the Main Power Switch is turned OFF.
:
Industrial Div.
: 8:30am to 17:00pm (CST)
(closed Saturday, Sunday and Public Holidays)
: 800-585-4675
: 847-843-7664
: 847-843-7622
: www.nskamericacorp.com
:
: 8:00am to 17:00pm
(closed Saturday, Sunday and Public Holidays)
: +81 (0) 289-64-3520
: webmaster-ie@nsk-nakanishi.co.jp
) and eliminate the need for motor brush maintenance.
-1 (rpm) makes high precision machining possible.
, Emergency Operating Function can be utilized. Using the open detection
, the CONTROLLER is capable of storing the last 5 Error Codes that were displayed.
-1
25 -
(rpm) (when using EM
63