Nakanishi E2280 Operation Manual page 50

③
Setting Fixed Motor No. 1 Speed
CAUTION
Actual motor rotation speed of the motor will be limited, based on maximum motor rotation speed and
the type of motor connected.
Procedure
1. Push the START / STOP Button (START / STOP) ⑯ .
2. is displayed. This indicates that Fixed Motor Rotation Speed cannot be set.
3. Push the START / STOP Button (START / STOP) ⑯ .
4. The setting Motor Rotation Speed displayed on Digital Speed Indicator ⑬ .
5. Push the Motor Speed Adjustment Button (SPEED
The Motor Rotation Speed range is 1,000 - 50,000min
6. Push the Error Reset Button (RESET) ㉑ to send the settings to memory.
displayed.
7. If you desire to set other parameters, push the Motor Speed Adjustment Button (SPEED
select the parameter that needs to be set.
8. When you are finished setting parameters, turn the Main Power Switch ⑨ to OFF.
④ Setting Fixed Motor No. 2 Speed
Procedure
1. Push the START / STOP Button (START / STOP) ⑯ .
2. is displayed. This indicates that Fixed Motor Rotation Speed cannot be set.
3. Push the START / STOP Button (START / STOP) ⑯ .
4. The setting Motor Rotation Speed displayed on Digital Speed Indicator ⑬ .
5. Push the Motor Speed Adjustment Button (SPEED
The Motor Rotation Speed range is 1,000 - 50,000min
6. Push the Error Reset Button (RESET) ㉑ to send the settings to memory.
displayed.
7. If you desire to set other parameters, push the Motor Speed Adjustment Button (SPEED
select the parameter that needs to be set.
8. When you are finished setting parameters, turn the Main Power Switch ⑨ to OFF.
⑤
Setting Maximum Motor No. 1 Speed
CAUTION
Actual motor rotation speed of the motor will be limited, based on maximum motor rotation speed and
the type of motor connected.
Procedure
1. Push the START / STOP Button (START / STOP) ⑯ .
2. is displayed. This indicates that Maximum Motor Rotation Speed cannot be set.
The Maximum Motor Rotation Speed is 50,000min
3. Push the START / STOP Button (START / STOP) ⑯ .
4. The Maximum Motor Rotation Speed is displayed on Digital Speed Indicator ⑬ .
5. Push the Motor Speed Adjustment Button (SPEED
The Motor Rotation Speed range is 1,000 - 50,000min
6. Push the Error Reset Button (RESET) ㉑ to send the settings to memory.
displayed.
7. If you desire to set other parameters, push the Motor Speed Adjustment Button (SPEED
select the parameter that needs to be set.
8. When you are finished setting parameters, turn the Main Power Switch ⑨ to OFF.
, ) ⑮ to set the motor rotation speed.
-1
(rpm).
) ⑮ to set the motor rotation speed.
,
-1
(rpm).
-1
(rpm).
) ⑮ to set the motor rotation speed.
,
-1
(rpm).
followed by will be
) ⑮ to
,
followed by will be
, ) ⑮ to
followed by will be
, ) ⑮ to
105