Nakanishi E2280 Operation Manual page 37

16 - 3 External Input / Output Connector Specifications
CAUTION
・ To minimize RF interference and noise, please keep the length of the cables as short as possible and
route them separately or as far away as possible from high voltage electrical cables.
・ Use only shielded cables to minimize RF interference and noise. Connect the shield to the plug cover.
・ Connect the shielded line to the Input / Output connector (The shielded line is grounded). Do not
connect another shielded line to any externally powered instrument.
① External Input / Output Connector A ③
Plug Part Number : XM3A - 2521 OMRON (or other similar high - quality product)
Cover Part Number : XM2S - 2511 OMRON (or other similar high - quality product)
② External Input / Output Connector B ④
Plug Part Number : XM3A - 1521 OMRON (or other similar high - quality product)
Cover Part Number : XM2S - 1511 OMRON (or other similar high - quality product)
Please prepare a Cover and Plug.
The shielding should be connected to the Cover.
* Use Mounting Screws that are (M2.6)
Fasten the Connector to the CONTROLLER using Mounting Screws (M2.6).
16 - 4 External Input / Output Connector A ③ / B ④ Pin configuration
92
1
14
2
15
3
16
4
17
5
18
6
19
7
20
8
21
9
22
10
23
11
24
12
25
13
Connector A ③
Fig. 33
1
10
2
11
3
12
4
13
5
14
6
15
7
16
8
17
9
Connector B ④