Nakanishi E2280 Operation Manual page 51

⑥ Setting Maximum Motor No. 2 Speed
Procedure
1. Push the START / STOP Button (START / STOP) ⑯ .
2. is displayed. This indicates that Maximum Motor Rotation Speed cannot be set.
The Maximum Motor Rotation Speed is 50,000min
3. Push the START / STOP Button (START / STOP) ⑯ .
4. The Maximum Motor Rotation Speed is displayed on Digital Speed Indicator ⑬ .
5. Push the Motor Speed Adjustment Button (SPEED
The Motor Rotation Speed range is 1,000 - 50,000min
6. Push the Error Reset Button (RESET) ㉑ to send the settings to memory.
displayed.
7. If you desire to set other parameters, push the Motor Speed Adjustment Button (SPEED
select the parameter that needs to be set.
8. When you are finished setting parameters, turn the Main Power Switch ⑨ to OFF.
⑦ Selection of External Speed Control Mode
Procedure
1. Push the START / STOP Button (START / STOP) ⑯ .
2. will be displayed. The motor speed can be set by using analog signal.
Push the Motor Speed Adjustment Button (SPEED
will be displayed. The motor speed can be set by using pulse signal.
Push the Motor Speed Adjustment Button (SPEED
will be displayed. The motor speed can be set by using speed point signal.
3. Set each signal following the procedure below.
3–1. To set
Push the Motor Speed Adjustment Button (SPEED
Error Reset Button (RESET) ㉑ .
After the setting is saved,
To set other parameters, push the Motor Speed Adjustment Button (SPEED
To finish setting parameters, turn the Main Power Switch ⑨ OFF.
3-2. To set
Push the Motor Speed Adjustment Button (SPEED
Error Reset Button (RESET) ㉑ .
After the setting is saved,
To set other parameters, push the Motor Speed Adjustment Button (SPEED
To finish setting parameters, turn the Main Power Switch ⑨ OFF.
3-3. To set
Push the Motor Speed Adjustment Button (SPEED
START / STOP Button (START / STOP) ⑯ .
3-3-1.
3-3-2. To set the Speed Point " 2 " (Motor No. 1), push the START / STOP Button (START /
3-3-3. To set the Speed Point " 3 " (Motor No. 1), push the START / STOP Button (START /
106
:
:
:
and will be displayed alternately. The Speed Point " 1 " (Motor No. 1) can be
set.
Push the Motor Speed Adjustment Button (SPEED
speed.
STOP) ⑯ .
and will be displayed alternately. The Speed Point " 2 " (Motor No. 1) can be
set.
Push the Motor Speed Adjustment Button (SPEED
speed.
STOP) ⑯ .
and will be displayed alternately. The Speed Point " 3 " (Motor No. 1) can be
set.
Push the Motor Speed Adjustment Button (SPEED
speed.
-1
(rpm).
, ) ⑮ to set the motor rotation speed.
-1
(rpm).
) ⑮ .
,
) ⑮ .
,
will be displayed followed by
will be displayed followed by
followed by
) ⑮ . While
, is displayed, push the
.
) ⑮ . While
, is displayed, push the
.
, ) ⑮ . While is displayed, push the
, ) ⑮ to set motor rotation
) ⑮ to set motor rotation
,
, ) ⑮ to set motor rotation
will be
, ) ⑮ to
, ) ⑮ .
) ⑮ .
,