Table of Contents
Advertisement
⑬
Confirmation of Parameter Setting
・ This mode allows the user to check the settings of parameters
cannot be checked.
⑭
Error History
・ The Error History, which records previous error codes can be confirmed by the Error Code displayed on the
Digital Speed Indicator ⑬.
・ The last Error Code recorded will be
Speed Indicator ⑬.
・The Error History cannot be erased or deleted.
・If Error History contains more than five errors, oldest Error History,
・ To clear Error History, push and hold the START / STOP Button (START / STOP) ⑯ for three seconds. A beep
emits and the Error History will be cleared.
⑮
Confirmation of Software Version
・The version of the program installed on the CONTROLLER can be checked.
・The program version is displayed on the Digital Speed Indicator ⑬ .
18 - 4 Setting procedures
①
Setting of Error Output Mode
CAUTION
If the Error Output Mode has been changed from the default setting, that setting will be displayed the
next time you enter Parameter Setting Mode.
Procedure
1. Push the START / STOP Button (START / STOP) ⑯ .
2.
is displayed. This indicates that when an error occurs, the output will be ' OFF (Open) '.
3. Push the START / STOP Button (START / STOP) ⑯ .
4.
is displayed. This indicates that when an error occurs, the output will be ' ON (Closed) '.
5. You can cycle through the choices by pushing the START / STOP Button (START / STOP) ⑯ .
6. Push the Error Reset Button (RESET) ㉑ to send the settings to memory.
displayed.
7. If you desire to set other parameters, push the Motor Speed Adjustment Button (SPEED
select the parameter that needs to be set.
8. When you are finished setting parameters, turn the Main Power Switch ⑨ to OFF.
②
Setting AUTO Mode for Motor Speed Control
Procedure
1. Push the START / STOP Button (START / STOP) ⑯ .
2.
is displayed. This indicates that speed control by the Motor Speed Adjustment Button (SPEED
) ⑮ is disabled (The External Command Signal Control will be operational).
,
3. Push the START / STOP Button (START / STOP) ⑯ .
4.
is displayed. This indicates that speed control is changeable by the Motor Speed Adjustment
Button (SPEED
5. You can cycle through the choices by pushing the START / STOP Button (START / STOP) ⑯ .
6. Push the Error Reset Button (RESET) ㉑ to send the settings to memory.
displayed.
7. If you desire to set other parameters, push the Motor Speed Adjustment Button (SPEED
select the parameter that needs to be set.
8. When you are finished setting parameters, turn the Main Power Switch ⑨ to OFF.
104
and the oldest will be
) ⑮ .
,
-
. The parameter
The Error code is displayed on the Digital
will be deleted.
followed by
followed by
and
will be
) ⑮ to
,
will be
) ⑮ to
,
Hide quick links:
Advertisement
Table of Contents
