Table of Contents
Advertisement
⑫
Selection of Illumination Brightness
Procedure
1. Push the START / STOP Button (START / STOP) ⑯ .
2. The first digit shows
the second digit shows the brightness level. For details on brightness level, refer to P103 " Table. 24 ".
3. Push the Motor Speed Adjustment Button (SPEED
The brightness level changes altanately as follow:
4. To select the brightness of the illumination on the bottom of the case, push the START / STOP Button
(START / STOP) ⑯ .
5. The first digit shows
second digit shows the brightness level. For details on brightness level, refer to P103 " Table. 24 ".
6. Push the Motor Speed Adjustment Button (SPEED
The brightness level changes altanately as follow:
7. Push the Error Reset Button (RESET) ㉑ to send the settings to memory.
displayed.
⑬
Confirmation of Parameter Setting
Procedure
1. Push the START / STOP Button (START / STOP) ⑯ .
2. The setting of the
3. Push the Motor Speed Adjustment Button (SPEED
4. The setting of the
5. Push the Motor Speed Adjustment Button (SPEED
6. The setting of the
When motor rotation speed is 30,000min
7. Push the Motor Speed Adjustment Button (SPEED
8. The setting of the
9. Push the Motor Speed Adjustment Button (SPEED
10. The setting of the
11. Push the Motor Speed Adjustment Button (SPEED
12. The setting of the
13. Push the Motor Speed Adjustment Button (SPEED
14. The setting of the
15. Push the Motor Speed Adjustment Button (SPEED
16. The setting of the
17. Push the Motor Speed Adjustment Button (SPEED
18. The setting of the
19. Push the Motor Speed Adjustment Button (SPEED
20. The setting of the
21. Push the Motor Speed Adjustment Button (SPEED
22. The setting of the
23. Push the Motor Speed Adjustment Button (SPEED
24. The setting of the
level of the illumination on the front side of the CONTROLLER, and the second one indicates the
illumination on the bottom of the CONTROLLER.
25. You can cycle through the choices by pushing the Motor Speed Adjustment Button (SPEED
26. Push the Error Reset Button (RESET) ㉑ .
27. If you desire to set other parameters, push the Motor Speed Adjustment Button (SPEED
select the parameter that needs to be set.
28. When you are finished setting parameters, turn the Main Power Switch ⑨ OFF.
and indicates the position of the blue illumination on the Control Panel, and
and indicates the position of the blue illumination on the bottom, and the
(
or
) and
are displayed.
(
or
) and
are displayed.
(
or
) and
are displayed.
-1
(rpm), " 30 " is displayed.
(
or
) and
are displayed.
(
or
) and
are displayed.
(
or
) and
are displayed.
(
,
or
) and
(
or
) and
are displayed.
(
or
) and
are displayed.
(
or
) and
are displayed.
(
or
) and
are displayed.
(
) and
are displayed alternately. The first digit indicates the brightness
will be displayed.
) ⑮ .
,
⇔
⇔
⇔
) ⑮ .
,
⇔
⇔
⇔
,
) ⑮ .
,
) ⑮ .
,
) ⑮ .
,
) ⑮ .
) ⑮ .
,
) ⑮ .
,
are displayed.
,
) ⑮ .
,
) ⑮ .
) ⑮ .
,
) ⑮ .
,
,
) ⑮ .
followed by
will be
) ⑮ .
,
) ⑮ to
,
109
Hide quick links:
Advertisement
Table of Contents
