Nakanishi E2280 Operation Manual page 31

③ Output Signal Ⅱ
Refer to Fig. 24 regarding the Output Signal of the " Rotating Pulse (PULSE) ". The output signal can be
connected for either sinking or sourcing.
Voltage and Current Specifications
・Applied Voltage (V) ≦ DC+30V
・Working Current (lp) ≦ 50mA
④ Motor Speed Control Signal
Rotation Speed can be selected by, applying analog voltage to VR1 and VR2. Refer to Fig. 25, 26 for
connections. Refer to Fig. 27, 28 for the relationship between Motor Speed and " Motor Speed Control
Voltage (VR) ".
CAUTION
When applying the VR, never input more than DC+10V to the CONTROLLER (Fig. 26). This will cause
serious damage to the I / O Board in the CONTROLLER.
Variable Registor
86
The side of CONTROLLER
The side of CONTROLLER
11
Vcc
3
VR2
23
VR1
10 DC0V
Fig. 25
DC+24V or DC0V
18
(COM_2)
19
(PULSE)
DC0V or +DC+24V
Fig. 24
Control Signal
Control Signal
Load
The side of CONTROLLER
3
VR2
23
VR1
10 DC0V
Fig. 26