Nakanishi E2280 Operation Manual page 19

Button / LED
Start / Stop Button
(START / STOP) ⑯
Rotation Direction Button
(DIR) ⑰
Motor Spindle Selection
(MOTOR) Button ⑱
74
Description
START / STOP LED
goes out (not lit)
START / STOP LED lights
Select the right (FWD.) or left (REV.) rotation direction for the motor spindle.
FWD LED (FWD) lights
REV LED (REV) lights
Select the motor spindle (No. 1 or No. 2) to be controlled.
No. 1 LED (No. 1) lights
No. 2 LED (No. 2) lights
The motor spindle is not rotating.
The motor spindle is rotating at the specified speed.
The motor spindle executes FWD. rotation.
With the cutting tool facing the operator, right hand
rotation (FWD.) will be counterclockwise rotation.
The motor spindle executes REV. rotation.
With the cutting tool facing the operator, left hand
rotation (REV.) will be clockwise rotation.
Select the motor spindle connected to Motor
Connector No. 1 ⑤ .
Select the motor spindle connected to Motor
Connector No. 2 ⑥ .