Nakanishi E2280 Operation Manual page 44

④
Setting Fixed Motor No. 2 Speed
CAUTION
If you set the rotation speed higher than the rotation speed set at
according to .
・ Allows the Motor No. 2 speed to be fixed. Settable Motor Speed Range is 1,000 - 50,000min
increments.
・Proactively prevents inadvertent change in speed.
・The Fixed Motor Speed can set by Control Mode MANUAL or AUTO.
Table. 14
Parameter
⑤
Setting Maximum Motor No. 1 Speed
・Maximum Motor No. 1 Speed can be set.
* Settable Motor Speed Range is 1,000 - 50,000min
・Allows a safe maximum rotational speed limit depending on the application.
・The Maximum Motor Speed can set by Control Mode MANUAL or AUTO.
Table. 15
Parameter
⑥
Setting Maximum Motor No. 2 Speed
・Maximum Motor No. 2 Speed can be set.
* Settable Motor Speed Range is 1,000 - 50,000min
・Allows a safe maximum rotational speed limit depending on the application.
・The Maximum Motor Speed can set by Control Mode MANUAL or AUTO.
Table. 16
Parameter
Set Contents
Fixed Motor Speed for Motor No. 2 is disabled.
Fixed Motor Speed for Motor No. 2 is enabled.
Set Contents
Setting of Maximum Motor Speed for Motor No. 1 is disabled.
Setting of Maximum Motor Speed for Motor No. 1 is enabled.
Set Contents
Setting of Maximum Motor Speed for Motor No. 2 is disabled.
Setting of Maximum Motor Speed for Motor No. 2 is enabled.
-1 -1
in 1,000min increments.
-1 -1
in 1,000min increments.
, rotation speed will be set
-1
in 1,000min
-1
99