Table of Contents
Advertisement
3-3-4. To set the Speed Point " 4 " (Motor No. 1), push the START / STOP Button (START /
3-3-5. To set the Speed Point " 1 " (Motor No. 2), push the START / STOP Button (START /
3-3-6. To set the Speed Point " 2 " (Motor No. 2), push the START / STOP Button (START /
3-3-7. To set the Speed Point " 3 " (Motor No. 2), push the START / STOP Button (START /
3-3-8. To set the Speed Point " 4 " (Motor No. 2), push the START / STOP Button (START /
3-3-9. To set the Speed Point " 1 " (Motor No. 1), push the START / STOP Button (START /
3-3-10. To finalize the settings, push the Error Reset Button (RESET) ㉑ .
4. To return to the
go to step 3-1 or 3-2.
5. To finish the settings, push the Error Reset Button (RESET) ㉑ .
6. After the settings are saved,
7. To set other parameters, push the Motor Speed Adjustment Button (SPEED
8. To finish setting parameters, turn the Main Power Switch ⑨ OFF.
⑧
Selection of External Motor Start Signal Control Mode
Procedure
1. Push the START / STOP Button (START / STOP) ⑯ .
2.
is displayed. This indicates that motor startup and setting the rotation direction cannot performed
simultaneously.
3. Push the START / STOP Button (START / STOP) ⑯ .
4.
is displayed. This setting is clockwise rotation with motor startup by " Rotation Command (Pin No.
14 : START) " or left hand rotation with motor startup by " Rotating Direction Setting (Pin No. 2 : DIR_
IN) " can be set.
5. You can cycle through the choices by pushing the START / STOP Button (START / STOP) ⑯ .
6. Push the Error Reset Button (RESET) ㉑ to send the settings to memory.
displayed.
STOP) ⑯ .
and
will be displayed alternately. The Speed Point " 4 " (Motor No. 1) can be
set.
Push the Motor Speed Adjustment Button (SPEED
speed.
STOP) ⑯ .
and
will be displayed alternately. The Speed Point " 1 " (Motor No. 2) can be
set.
Push the Motor Speed Adjustment Button (SPEED
speed.
STOP) ⑯ .
and
will be displayed alternately. The Speed Point " 2 " (Motor No. 2) can be
set.
Push the Motor Speed Adjustment Button (SPEED
speed.
STOP) ⑯ .
and
will be displayed alternately. The Speed Point " 3 " (Motor No. 2) can be
set.
Push the Motor Speed Adjustment Button (SPEED
speed.
STOP) ⑯ .
and
will be displayed alternately. The Speed Point " 4 " (Motor No. 2) can be
set.
Push the Motor Speed Adjustment Button (SPEED
speed.
STOP) ⑯ .
After the settings have been finalized,
or
setting, push the Motor Speed Adjustment Button (SPEED
will be displayed followed by
,
) ⑮ to set motor rotation
) ⑮ to set motor rotation
,
) ⑮ to set motor rotation
,
,
) ⑮ to set motor rotation
,
) ⑮ to set motor rotation
will be displayed.
.
,
followed by
) ⑮ and
,
) ⑮ .
will be
107
Hide quick links:
Advertisement
Table of Contents
