Configuring Length Delimited Parser Information - GE CARESCAPE B850 Service Manual

CARESCAPE Monitor B850
2. Select Save.
If you selected No Parser, the barcode setting configuration is complete.
For a Length or Character Delimited Parser, follow the applicable instructions.



7.8.3 Configuring length delimited parser information

Points to note

If you configure Age, you must either select the Age Unit item or one of the age units (e.g.,
Years, Months, Weeks, Days) below Fixed Option.

If you configure Height, you must either select the Height Unit item or one of the height
units (e.g., Feet, Inches, Meters, Centimeters, Millimeters) below Fixed Option.

If you configure Weight, you must either select the Weight Unit item or one of the weight
units (e.g., Kilograms, Grams, Micrograms, Pounds, Ounces) below Fixed Option.

For an example of admit/discharge configuration for a length delimited parser, see
Example of length delimited parser information on page 79.
1. In the Admit/Discharge Configuration window, enter the location and length information
for each data item.
If an item is not included in the barcode, type 0 in the item's Position and Length fields, or
leave the Position and Length fields blank.
a.
b.
2. For Gender Format, select Fixed or Configured.
If you select Configured:
a.
b.
3. Below Fixed Option, select the applicable value:
Item
Height Unit
Weight Unit
Age Unit
4. Scroll to the bottom of the window, and select Save.
All changes take effect immediately.
78
2106778-001
7.8.3 Configuring length delimited parser
or
7.8.4 Configure character delimited parser
In the Position column, type the beginning position of the field in the data string
(from 1 to 300).
In the Length column, type the number of characters (from 1 to 99) that the field
contains.
Type the character that identifies Male.
Type the character that identifies Female.
Item selection in the top part of
the screen
Both Height and Height Unit
Height only
Both Weight and Weight Unit
Weight only
Both Age and Age Unit
Age only
information.
information.
Fixed Option selection
Non-Fixed.
Select value from drop-down list.
Non-Fixed.
Select value from drop-down list.
Non-Fixed.
Select value from drop-down list.