Resetting The Password; Restarting The Patient Monitor; Setting Up The Remote Service; Configuring The Remote Service - GE CARESCAPE B850 Service Manual

7.14.3 Resetting the password

If the valid password for the biomed user account is forgotten, contact your local GE
representative to request a password reset key.
Provide the following information when requesting a password reset key:
• serial number of the monitor
When you have received the password reset key:
1. Go to the service interface login screen.
2. Select Forgot password?.
The selection appears on the login screen after an invalid login.
3. Enter the received Reset Key.
4. Enter the received Expiration Date for the reset key in the following format: DDMMYYYY
5. Select Reset Password.
The biomed user account is now reset to default settings. For more information, see
section

7.15 Restarting the patient monitor

You can use the Restart module in Webmin to restart the patient monitor after making
configuration changes that require a manual restart to come into effect. For example after
changing network or language settings, or adding activation codes for licenses.
NOTE: Loss of monitoring - This function is enabled only when the patient monitor is in a
discharged state. Before restarting the patient monitor, verify that the patient is discharged
from the patient monitor.
1. Log in to Webmin.
2. Select Configuration > Restart.
3. In the Monitor Restart window, select Restart.
The patient monitor will shut down and restart automatically.

7.16 Setting up the remote service

7.16.1 Configuring the remote service

To configure the InSite RSvP remote service tool.
1. Log in to Webmin.
2. Select Configuration > Remote Service.
3. In the Sub-Modules for Remote Service menu, select Configuration.
7.14.1 User accounts and passwords.
Configuration
87
2106778-001