Table of Contents
Advertisement
Field name
Username
Password
Confirm Password
Encryption Level
4.
Select Save.
All changes take effect immediately.
NOTE: The hospital's IT Administrator or biomedical department can supply these values.
5.
Select Save.
All changes take effect immediately.
7.6.1 Troubleshooting
The information entered must confirm to the following standards:
Citrix Server Address: Any valid IPv4 address.
Initial Program: Name of Citrix-published application to launch.
Citrix User Name: Any valid Windows username. If blank, the user will be forced to enter it
manually.
Citrix Password: Any valid Windows password.
Citrix Timeout: Any integer greater than or equal to 0 and less than 9999.
Citrix Startup Time: Any integer greater than or equal to 0 and less than 9999.
7.6.2 Glossary
Citrix Server Address: IP address or DNS name of Citrix Server.
Initial Program:
Citrix User Name:
Citrix Password:
Citrix Session Timeout (in Minutes)
Username
Password
Confirm Password
Name of Citrix-published application to launch.
ID used to log into Citrix session.
Password used to log into Citrix session.
Description and valid choices
Any valid Windows username. You can leave
this field empty to allow anonymous login.
The maximum length is 128 characters.
Any valid Windows password. You can leave
this field empty to allow anonymous login.
The maximum length is 128 characters.
The password and confirmed password must
be the same.
Select one of the following encryption levels:
- "Basic"
- "RC5 (128 bit - Login Only)"
- "RC5 (40 bit)"
- "RC5 (56 bit)"
- "RC5 (128 bit)"
Configuration
75
2106778-001
Advertisement
Table of Contents
Troubleshooting
