Deleting A Printer; Printing A Test Page; Configuring Citrix - GE CARESCAPE B850 Service Manual

CARESCAPE Monitor B850

7.5.2 Deleting a printer

NOTE: Before deleting a laser printer, check Monitor Setup > Printing > Devices > Status. If a
printout is assigned to the printer to be deleted, redirect the printout to another valid printer.
1. Log in to Webmin.
2. Select Configuration > Printers.
3. In the Sub-Modules for Printers menu, select Delete Printer.
4. In the Delete Printer window, select the printer to delete.
5. Select Save.
The change will take effect immediately.

7.5.3 Printing a test page

1. Log in to Webmin.
2. Select Configuration > Printers.
3. In the Sub-Modules for Printers menu, select Print Test Page.
4. In the Print Test Page window, select the printer.
5. Select Save.

7.6 Configuring Citrix

Configure the Citrix connection for iPanel software.
NOTE: GE is not responsible for installing or configuring the Citrix server.
NOTE: Contact hospital's IT Administrator or biomedical department to obtain values to the
following fields.
NOTE: Server address, initial program and Citrix session timeout are mandatory fields.
1. Log in to Webmin.
2. Select Configuration > Citrix.
3. In the Citrix Configuration window, enter the applicable information in the following
fields:
Field name
Server Version
Server 1 to Server 4 Addresses
Initial Program
Citrix Session Timeout (in Minutes)
74
2106778-001
Description and valid choices
Select the supported server version: 4.0, 4.5,
5.0, 6.0, 6.5.
Blank, server IP address or server hostname,
up to 255 character long.
Initial Citrix- published application that will be
launched, for example #MUSE. This field is
mandatory, if the server address has been
entered. The maximum length is 128
characters.
Valid values are between 0-99. Keeping the
session alive allows users to quickly return to
their last session, but locks a Citrix license.
Selecting "0" disables the timeout feature.