13Test Completion - GE CARESCAPE B850 Service Manual

CARESCAPE Monitor B850
4. Verify that the recorder starts printing. Let the recorder print for approximately 10
seconds and verify the following things from the printout:



Select one of the following options to stop printing:

Select Stop Printing from the main screen.

Select Monitor Setup > Printing > Waveforms > Stop Printing.
10.3.13 Test completion
Select Discharge Patient or Reset Case to discard any changes made to the patient monitor
configuration during checkout.
• Complete the Appendix
128
2106778-001
The header line contains the date, time and some other applicable status and
configuration information.
The grid is clear.
The waveforms labels appear in the printout as configured.
B. Maintenance check form.