Selecting And Configuring S/5 Network - GE CARESCAPE B850 Service Manual

•
•
•
9. Select the applicable Speed & Duplex option.
10. Select Save.
The default network speed is 10 Mbps half duplex, which suppresses the effects of network
storms resulting from network misconfigurations. Please ensure that the network in your
facility meets the network configuration requirements as described in the Patient Monitoring
Network Configuration Guide.
The network configurations will be saved and become active when the patient monitor is
restarted.

7.2.3 Selecting and configuring S/5 Network

To select S/5 Network for the real-time network infrastructure:
1. Log in to Webmin.
2. Select Configuration > Network > Wired Interfaces.
The current network configuration is shown in the Present Configuration table.
3. Below Select Network Type in the Network Configuration window, select the applicable
network type: S/5.
4. Select Next to proceed on network configuration.
NOTE: When S/5 Network is selected, the CARESCAPE Network is disabled.
The patient monitor may be configured to the S/5 Network, or IX Network, or both.
Network connection(s)
S/5 Network only
IX Network only
Both S/5 and IX Network
1. In the Network Configuration window below S/5 Network, enter a Virtual ID.
NOTE: Valid values are within the range of 50000 to 55000, inclusive.
NOTE: The Virtual ID must be unique for each patient monitor connected to the S/5 Network.
2. Below IX Network, select DHCP or Manual Configuration.
a.
b.
c.
d.
3. Select Speed & Duplex option.
4. Select Save.
The default network speed is 10 Mbps half duplex, which suppresses the effects of network
storms resulting from network misconfigurations. Please ensure that the network in your
facility meets the network configuration requirements as described in the Patient Monitoring
Network Configuration Guide.
CF:xx:xx:xx:xx:xx: Reserved by IANA for PPP
FF:FF:FF:FF:FF:FF: Broadcast
Multicast addresses in which the first octet is an odd number (for example,
97:xx:xx:xx:xx:xx)
Enter a Static IP address.
Enter a valid Netmask level.
Enter a valid Default Gateway.
Enter valid DNS Server addresses if applicable.
Steps to be performed
1 and 4
2, 3, and 4
1, 2, 3, and 4
Configuration
71
2106778-001