Positioning The Dp2K-S Series Projector At Port Window - Barco DP2K-S Series User And Installation Manual

5. Physical installation
5.1

Positioning the DP2K-S series projector at port window

W
ARNING
General guidelines
• Use a solid pedestal to mount the DP2K-S series projector on to. Ensure that the pedestal can support the weight of the
projector and that all feet of the projector are captured.
• The pedestal should be placed in front of the port window wall in a manner such that the projector lens is at a minimum distance
of 20 centimeters from the port window.
Image 5-1
Positioning at port window
Barco offers a pedestal for the DP2K-S series projector. This universal pedestal allows for a solid and easy
setup of the projector. The universal pedestal support 19" rack systems. (projector peripherals such as alter-
native content switchers, ShowVault, etc.)
Necessary tools
• 14mm open end wrench
• 17mm open end wrench
Projector centering
1. If the projector is standalone in front of the port window, center the projector with the theatre screen (see reference A image 5-2).
2. If an analog film projector is already present (projector will be off-center), try to optimize aim (see reference B image 5-2).
Note: Unlike analog film projectors, it is best to keep the projector lens surface as parallel as possible to the screen, even if it
is significantly above the screen center.
Caution: The front foot has an adjustment range of maximum 70mm. The back feet maximum 150mm.
20
:
The installation of the DP2K-S series projector requires at least 4 adult persons.
20 cm
R5977692 DP2K-S SERIES 10/12/2012