Table of Contents
Advertisement
Image 8-6
4. Connect the DC plug, the RJ45 Ethernet plug and the D-SUB plug of the customized cable into their respective sockets on the
Touch Panel interface.
Image 8-7
5. Connect the circular plug of the customized cable with the circular socket (reference 6 image 8-8) at the right side of the Local
Keypad of the projector.
Caution:
To avoid connector damage, align the pins before you connect the customized cable.
Note: Ensure to tighten the locking nut on the connector.
Image 8-8
6. Attach the multi cable to the swivel arm using the two Velcro strips.
7. Position the Touch Panel interface in the desired location. See "Repositioning the Touch Panel interface", page 52.
R5977692 DP2K-S SERIES 10/12/2012
5
6
8. Communicator Touch Panel
51
Advertisement
Table of Contents
