Table of Contents
Advertisement
Image 12-15
2. Remove the side cover of the Lamp House by releasing the two quarter turn screws (reference 4 image 12-16) of the side cover
as illustrated.
Caution:
Ensure that you wear protective clothing, a full face shield and protective gloves.
Image 12-16
3. Release the three quarter turn screws (reference 5 image 12-17) of the UV blocker assembly as illustrated. Do not remove the
UV blocker yet. Hold it in position!
Caution:
Ensure that the anode support remains in its position while releasing the screws as it serves to support the front end
of the lamp.
5
Image 12-17
4. Support the xenon lamp inside the Lamp House with one hand while removing the UV blocker assembly from the Lamp House.
Take care not to damage the UV blocker.
Warning:
Supporting the xenon lamp with one hand prevents the xenon lamp from dropping and colliding with the chassis of
the Lamp House.
R5977692 DP2K-S SERIES 10/12/2012
12. Lamp House & Lamp replacement
3
2
4
1
85
Advertisement
Table of Contents
