12. Lamp House & Lamp replacement
Image 12-18
5. Slide out the anode connector from the Lamp House. The anode connector remains attached with the lamp anode wire.
Image 12-19
6. Gently remove the xenon lamp together with the anode connector out of the Lamp House. Do not apply excessive force to the
xenon lamp. The xenon lamp should easily slide out the cathode socket of the Lamp House.
Warning:
Supporting the xenon lamp with one hand while pulling it out with other hand prevents it from bumping against the
chassis of the Lamp House.
Image 12-20
7. Place the xenon lamp in its protective container or wrap the xenon lamp in a protective cloth and secure with two binders.
86
R5977692 DP2K-S SERIES 10/12/2012