Lamp Change Maintenance Actions - Barco DP2K-S Series User And Installation Manual

13. Preventative maintenance actions

13.3 Lamp change maintenance actions

Maintenance actions at every lamp change
The maintenance actions, listed below, which are required at every lamp change may be performed by a trained
projectionist who is familiar with potential hazards associated with the xenon lamp.
No. Maintenance action
1 Check the UV blocker of the Lamp House for dust.
2 Check the Reflector of the Lamp House for dust.
3 Visual inspection of the lamp anode and cathode Igniter (SPG) connectors of
the Lamp House.
4 Visual inspection of the lamp anode and cathode cables of the Lamp House.
104
Remarks
Only clean the UV blocker in case dust
is clearly visible upon the surface of the
UV blocker (both sides). Use an optical
cloth.
Only clean the Reflector in case dust
is clearly visible upon the surface of
the Reflector. Take the Lamp House to
another room and use compressed air
to blow away the dust. Use an optical
cloth.
Replace the Lamp House in case of
degradation, damage, etc.
Replace the Lamp House in case of
degradation, damage, etc.
R5977692 DP2K-S SERIES 10/12/2012