Barco DP2K-S Series User And Installation Manual page 96

12. Lamp House & Lamp replacement
5
Image 12-31
9. Secure the xenon lamp cathode with the hexagon socket head cap screw (reference 1 image 12-32), spring washer (reference
2 image 12-32 and plain washer (reference 3 image 12-32). Fasten the screw with a torque of 2.5Nm (1.84 lbf*ft). Use a torque
wrench with a 5 mm Allen socket.
Caution: Make sure that both pins (reference 11 image 12-32) of the cathode adapter remain engaged in the foreseen slots.
Image 12-32
10.Install the side cover of the Lamp House and fasten the three quarter turn screws (reference 4 image 12-33) of the cover.
Note: Please ensure that the quarter turn screws turning wires are flush with the cover or interference will occur while inserting
the Lamp House into the projector.
Image 12-33
92
3
2
1
11
4
R5977692 DP2K-S SERIES 10/12/2012
2.5 Nm
2.5 .5 .5 Nm