Removal Of The Top Cover - Barco DP2K-S Series User And Installation Manual

15. Removal and installation of the projector covers

15.3 Removal of the top cover

W
ARNING
cedure.
To remove the top cover from the projector the Communicator Touch Panel has to be removed first if installed
onto the top of the projector. This procedure assumes that the Communicator Touch Panel is not installed
onto the top of the projector.
Necessary tools
7mm flat screwdriver.
How to remove the top cover?
1. Loosen the four captive screws (reference 1 image 15-3) of the top cover using a 7mm flat screwdriver.
2. Remove the top cover from the projector.
Image 15-3
120
:
Switch off the projector prior to start with this procedure, unless otherwise specified in the pro-
1
R5977692 DP2K-S SERIES 10/12/2012