Mounting The Ip4Ww-Battery Box; Floor-Mounting The Ip4Ww-Battery Box; Figure 2-27 Connecting The Battery Connection Cable; Figure 2-28 Installation Of Front Cover - NEC SL1100 Hardware Manual

ISSUE 4.1 (R5.1)
13. Plug the Battery Connection Cable into the Fuse unit.
14. Align tabs a to f to holes A to F on Battery Box. Slide the Front cover and tighten the two screws.
f
Front cover

2.6 Mounting the IP4WW-Battery Box

The IP4WW-Battery Box can be installed on either the floor or wall. One KSU can be mounted on an
IP4WW-Battery Box.

2.6.1 Floor-Mounting the IP4WW-Battery Box

Battery box can be mounted on the floor using the FM/WM Base-F, FM/WM Base-R and WM Support.
(Note: FM = Floor-Mount and WM = Wall-Mount)
Hardware Manual
Battery Connection
Cable
Fuse unit

Figure 2-27 Connecting the Battery Connection Cable

d
b

Figure 2-28 Installation of Front Cover

F
D
B
c
a
e
Two screws
(with stopper)
SL1100
E
C
A
2-21