Reference Material; Network Port Requirements And Licensed Third-Party Software; Reset Modes - Extron electronics TouchLink TLSI 201 User Manual

Reference
Material
This section describes:
•
•
•
•

Network Port Requirements and Licensed Third-Party Software

For information about network port requirements and licensed third-party software for
the touchpanels described in this guide, please refer to the Pro Series Control Product
Network Ports and Licenses Guide, which is available at www.extron.com.

Reset Modes

The TLSI 201 has four reset modes that are initiated by pressing the Reset button:
•
•
•
•
The Reset button is found on the rear panel (see
Network Port Requirements and Licensed Third-Party Software
Reset Modes
Secure Sockets Layer (SSL) Certificates
IEEE 802.1X Certificates
Use Factory Firmware (see page 24)
Reset All IP Settings (see page 24)
Reset to Factory Defaults
Enable or Disable the DHCP Client
(see page 25)
(see page 25)
figure 5,
G
TLSI 201 • Reference Material
on page 9).
23