Table of Contents
Advertisement
Calibration Screen
Figure 15.
1.
2.
3.
4.
5.
Touch crosshair to calibrate
1920x1080
Touch Calibration Screen
Press and hold down the recessed front-panel Menu button (see
page 9) for at least 3 seconds.
Release the button. The calibration screen opens to show cross-hairs in the top left
corner of the screen (see figure 15).
Follow the on-screen instructions. When this point is calibrated, the cross-hairs in the
top left corner are replaced by a new set of cross-hairs.
Calibrate all five sets of cross-hairs (one in each corner and a fifth in the center of the
screen).
Once the calibration process is completed, the calibration screen closes.
figure
5,
B
TLSI 201 • On-screen Menus
, on
15
Advertisement
Table of Contents
