On-Screen Menus; Setup Menu; Status - Extron electronics TouchLink TLSI 201 User Manual

On-screen Menus

On-screen menus allow initial configuration of the TLSI 201.
•
•

Setup Menu

To access the setup menus, press the recessed front-panel Menu button (see
figure
The menu opens at the Status screen. There are five different screens:
•
•
•
Screens are selected by pressing the appropriate button in the navigation panel at the top
of the screen.
Buttons that have been selected, turn yellow. Buttons that have not been selected are
black.
To save changes and exit from the setup menu, press the red Exit button in the top right
corner of the screen.

Status

Model:
Part Number:
Firmware
Version:
Bootloader
Version:
Figure 6.
Figure 6 shows the Status screen for the TLSI 201. This is a read-only screen. The Info
panel provides basic information about the interface.
Each of the other four panels summarizes information from the other screens. Pressing
any of the panels opens the corresponding screen in exactly the same way as pressing
the buttons in the top navigation panel.
The bubble in the Network panel lights green when there is a network connection or turns
into a red square if there is no connection.
Setup Menu
Calibration Screen
5, , on page 9).
C
Status Audio
•
Network Advanced
•
Display
Status Display
Network
Info Network
IP Address: 192.168.254.251
TLSI 201
DHCP: Off
Host Name: TLSI-AB-CD-EF
60-1669-01
1.00
Audio
1.00
Click Volume:
Click Mute:
Status Screen
Audio Advanced Exit
Display
Resolution: 1920x1080
Sleep Timer: Off
Advanced
99 Menu PIN: Disabled
Off
TLSI 201 • On-screen Menus 10