Table of Contents
Advertisement
Display
The Display screen is used to set the Sleep Timer.
Status
Figure 11.
Sleep timer
The Sleep Timer determines how long the panel is inactive before it enters sleep mode,
when the screen goes dark to save power.
To deactivate the sleep timer, click Off. The controls for the Sleep Timer are grayed out.
To set the sleep timer, ensure the function is activated by clicking On.
Set the time (in minutes) by pressing the up and down arrows until the required time
appears in the gray box. Alternatively, place your finger in the list box and slide it up to
increase the time or down to decrease the time. The timer range is from 1-120 minutes.
Audio
Status
Figure 12.
The TLSI 201 provides audible feedback to accompany events such as a screen button
being pressed. Use the Click fader control to adjust the volume of this feedback from
0 to 100% in 1% increments. By default the fader set to 80%.
Underneath the fader control is the mute button, which toggles the volume between audio
mute and the value set on the slider.
Network
Audio
Display
Sleep Timer
2
3
4
min.
On
Off
Output Screen
Network
Display
Audio
Click
100
50
0
Audio Screen
Advanced
Exit
Advanced
Exit
TLSI 201 • On-screen Menus
13
Advertisement
Table of Contents
