Extron electronics TouchLink TLSI 201 User Manual page 20

If DHCP is disabled, set the unit IP address, subnet mask, gateway address, and
3.
DNS server address.
Press the button for the address to be edited. A screen opens, showing the address
a.
and a numerical keypad.
IP Address
1 9 2 1 6 8 2 5 4
1 2
4 5
7 8
0
Back
Figure 9. Numeric Pad for Setting IP Addresses
Enter the 3-digit value for that octet (leading zeroes in the octet are ignored).
b.
NOTES:
Octets can have any value between 0 and 255.
•
If you attempt to enter an invalid number, for example 892, you are able
•
to enter the 89 but the 2 cannot be entered.
When a valid 3-digit value is entered, the next octet is automatically
•
selected.
OK to save the changes and return to the Network screen or press Cancel to
Press
c.
Network screen without saving the changes.
return to the
If you have changed any of the values
4.
in the Network screen, the background
color of the button changes to blue.
Press Apply to apply the new values or
press Revert to return to the previous
values without saving the changes. The
button returns to gray.
If you have not made any changes, the
Apply and Revert buttons are grayed
out and non-functional.
Clear
2 5 1
3
6
9
OK
Cancel
Unsaved
Saved
Figure 10.
TLSI 201 • On-screen Menus
0.0.0.10
0.0.0.10
IP Address, unsaved (top)
and saved (bottom).
12