Table of Contents
Advertisement
TLSI 201 Front Panel Features
A B
A
A
Figure 5.
A
B
C
D
R
MENU
B C
B
C
C
TLSI 201 Plus Front Panel
Power LED — Indicates the power status and the reset status of the unit.
Reset button (recessed) — Allows the unit to be reset in any of three different
modes. It also allows the user to toggle between enabling and disabling the DHCP
client (see
Reset Modes
on page 23).
Menu button (recessed) — Opens the
Calibration Screen
(see page 15) for the interface:
Press the button briefly (less than 2 seconds) to open the internal menu screens.
•
Press and hold the button (at least 3 seconds) to open the Calibration screen.
•
Follow the on-screen instructions to calibrate the touchpanel.
Press the button briefly (less than 2 seconds) for a second time to close the
•
current screen without saving any changes.
Status LEDs —
The Signal LEDs light green when a video signal is detected and are unlit when
•
no signal is detected.
The HDCP LEDs light green when HDCP content is detected and are unlit when
•
HDCP content is not detected.
INPUT
OUTPUT
SIGNAL
HDCP
D
D
D
Setup Menu
(see page 10) and
TLSI 201 • Panel Features
TLSI 201
9
Advertisement
Table of Contents
