To Use The Built-In Help System - Rigol MSO5000-E Series User Manual

RIGOL

To Use the Built-in Help System

The help system of this oscilloscope provides instructions for all the function keys on
the front panel and their corresponding menu keys. The steps for opening the built-in
help system are as follows:
1. Press Utility → System → Help, and then the "Help" menu is displayed
on the screen. You can also use the touch screen function, tap the function
navigation icon
function navigation. Tap the "Help" icon, and then the "Help" menu is displayed
on the screen.
2. Press Content on the front panel or tap the "Content" menu item, and then the
help information is displayed on the screen, as shown in Figure 1-20. The help
interface mainly consists of two sections. The left section lists "Help Options",
and the right section is the "Help Display Area".
After opening the help interface, you can get its help information in the "Help Display
Area" through the following three methods:
Method 1:
For the keys, you can directly press the front-panel keys (except the Power key
the Menu off key and Back key) to obtain the corresponding help information.
For the buttons, you can rotate the knob or press down the knob to get the
corresponding help information (except the multifunction knob
of rotating the knob is different from that of pressing down the knob, these two
operations will give you different help information.
Method 2:
In the "Help Options", rotate the multifunction knob
1-28
at the lower-left corner of the touch screen to enable the
Help Options Help Display Area
Figure 1-20 Help Information
Chapter 1 Quick Start
). As the function
to switch among the help
MSO5000-E User Guide
,